Back to regular posts to split up these inspirational companies.
The interior set!! Once the floor was down and set, I made the walls. Alongside this I cut out more miniature pattern pieces than i can count to hang between the two pillars seen below.
I wanted to keep the set as simple as possible maintaining the hand built stop motion feel. For this, cardboard was the perfect material for the walls.
I made the frames with thin pieces of wood which locked into each other and the base using carefully drilled holes, large bolts and wing nuts.
The only issue with the cardboard is the colour, it was difficult to commit to a colour at this point as everything sits in the same sepia toned theme. I tried multiple colour swatches and in the end decided (with help from twitter) on the blue.
However, when mixing the final paint colour I made it slightly too dark, this combined with the brown of the cardboard showing through made for a much different colour but overall I'm still happy with it.
Below is an example of how the frames were made for each wall. this time in order to fit the door, which was made for my by Saeed, a 2nd year model maker.
see his blog here!
Extra props were made to generally fill out the tailors cutters. and make it look more aged and used. Fabric rolls were simple enough to make and luckily Saeed was nice enough to make some miniature cardboard boxes, visible under the table in the photo below.
I also folded various fabrics and glued them onto a shelf to fill the blank wall space.
Finally the outside wall! One of the other reasons for using cardboard was that it was easy to cut out a hole in a wall to insert a perspex window.
This was simple enough to make, simply two pieces of cardboard with the same cut taken out of each, a sheet of perspex was glued between the two and balsa wood glued around the edges. The exterior wall was made by peeling off the first layer of brown paper on the cardboard, revealing the corrugated card. This was then painted a light grey.
No comments:
Post a Comment